AP GN Aviation Mechanic Privileges and Limitations

Certificated mechanics with a powerplant rating may perform

any inspection required by the Federal Aviation Regulations on a powerplant or propeller or any component thereof, and may release the same to service.
100-hour and/or annual inspections required by the Federal Aviation Regulations on powerplants, propellers, or any components thereof, and may release the same to service.
100-hour inspections required by the Federal Aviation Regulations on a powerplant, propeller, or any component thereof, and may release the same to service.

A repair, as performed on an airframe, shall mean

the upkeep and preservation of the airframe including the component parts thereof.
the restoration of the airframe to a condition for safe operation after damage or deterioration.
simple or minor preservation operations and the replacement of small standard parts not involving complex assembly operations.

Under the Federal Aviation Regulations, an aviation maintenance technician is required to perform maintenance on an aircraft so that it

always meets its original type design.
is at least equal to its original or properly altered condition.
exceeds minimum standards with regard to aerodynamic function, structural strength, resistance to vibration, and other qualities affecting airworthiness.

The replacement of fabric on fabric-covered parts such as wings, fuselages, stabilizers, or control surfaces is considered to be a

minor repair unless the new cover is different in any way from the original cover.
minor repair unless the underlying structure is altered or repaired.
major repair even though no other alteration or repair is performed.

Which is classified as a major repair?

The splicing of skin sheets.
Installation of new engine mounts obtained from the aircraft manufacturer.
Any repair of damaged stressed metal skin.

The 100-hour inspection required by Federal Aviation Regulations for certain aircraft being operated for hire may be performed by

persons working under the supervision of an appropriately rated mechanic, but the aircraft must be approved by the mechanic for return to service.
appropriate rated mechanics only if they have an inspection authorization.
appropriated rated mechanics and approved by them for return to service.

A person working under the supervision of a certificated mechanic with an airframe and powerplant rating is not authorized to perform

repair of a wing brace strut by welding.
a 100-hour inspection.
repair of an engine mount by riveting.

Certificated mechanics under their general certificate privileges may

perform minor repairs to instruments.
perform 100-hour inspection of instruments.
perform minor alterations to instruments.

An Airworthiness Directive requires that a propeller be altered. Certificated mechanics could

perform and approve the work for return to service if it is a minor alteration.
not perform the work because it is an alteration.
not perform the work because they are not allowed to perform and approve for return to service, repairs or alterations to propellers.

The replacement of a damaged vertical stabilizer with a new identical stabilizer purchased from the aircraft manufacturer is considered a

minor alteration.
major repair.
minor repair.

FAA certificated mechanics may

approve for return to service a major repair for which they are rated.
supervise and approve a 100-hour inspection.
approve for return to service a minor alteration they have performed appropriate to the rating(s) they hold.

A certificated mechanic with a powerplant rating may perform the

annual inspection required by the Federal Aviation Regulations on a powerplant or any component thereof and approve and return the same to service.
100-hour inspection required by the Federal Aviation Regulations on a powerplant or any component thereof and approve and return the same to service.
100-hour inspection required by the Federal Aviation Regulations on an airframe powerplant, or any other component thereof and approve and return the same to service.

What part of the Federal Aviation Regulations prescribes the requirements for issuing mechanic certificates and associated ratings and the general operating rules for the holders of these certificates and ratings?

14 CFR Part 43.
14 CFR Part 91.
14 CFR Part 65.

14 CFR Part 65 contains regulations regarding the certification of

pilots, flight instructors, and ground instructors.
airmen, other than flight crewmembers.
flight crewmembers other than pilots.

14 CFR Part 65 Subpart D contains regulations regarding the certification of

repairmen.
pilots.
mechanics.

A certificated mechanic shall not exercise the privileges of the certificate and rating unless, within the preceding 24 months, the Administrator has found that the certificate holder is able to do the work or the certificate holder has

served as a mechanic under the certificate and rating for at least 18 months.
served as a mechanic under the certificate and rating for at least 12 months.
served as a mechanic under the certificate and rating for at least 6 months.

Under Title 14 of the Code of Federal Regulations, which is the maximum penalty for falsification, alteration, or fraudulent reproduction of certificates, logbooks, reports, and records?

Ineligibility to receive any certificate or rating for one year.
Imprisonment for one year and a $5,000 fine.
Suspension or revocation of any certificate held.

How long does the holder of a certificate under Part 65 have to notify the FAA after any change in permanent mailing address?

30 days.
120 days.
90 days.

Why is a mechanic applicant issued a temporary certificate after successful completion of the required tests?

To allow for review of their application and supplementary documents.
So that a background check/investigation may be completed.
Both of the other two choices.

How long is a mechanic certificate with airframe and/or powerplant ratings(s) valid?

Until the holder is relieved of duties for which the holder was employed and certificated.
Until voluntarily surrendered, permanently revoked, or temporarily suspended.
24 months after the holder has last exercised the privileges of the certificate.

What is the maximum duration of a temporary airman certificate?

60 days.
90 days.
120 days.

When may an otherwise qualified mechanic who does not read, write, speak, and understand the English language be eligible to apply for a mechanic certificate?

When a special authorization has been issued by the supervising FAA Flight Standards Office.
When employed outside the United States by a U.S. air carrier.
When employed outside the United States.

Which of the following statements is true for a certificated and appropriately rated mechanic regarding repairs and alterations?

He or she may perform an airframe major repair or major alteration, but cannot approve the work for return to service.
He or she may perform airframe minor repairs and minor alterations and approve the work for return to service, but cannot perform an airframe major repair or major alteration.
He or she may perform an airframe major repair or major alteration and approve the work, but not the entire aircraft, for return to service.

Which of the following is an instance when a special flight permit may not be issued?

Flying passengers on a scheduled operation.
Flying the aircraft to a location where repairs or maintenance can be performed.
Flying a customer demonstration flight.

(1) Certificated mechanics with an airframe rating may perform a minor repair to an airspeed indicator providing they have the necessary equipment available.

(2) Certificated mechanics with a powerplant rating may perform a major repair to a propeller providing they have the necessary equipment available.

Regarding the above statements,

only 1 is true.
neither 1 nor 2 is true.
only 2 is true.

Who is responsible for determining that materials used in aircraft maintenance and repair are of the proper type and conform to the appropriate standards?

The installing person or agency.
The owner or operator of the aircraft.
The manufacturer of the aircraft.

Which of these publications contains standards for protrusion of bolts, studs, and screws through self-locking nuts?

AC 41.13-1B
AC 43.13-2
Aircraft Specifications or Type Certificate Data Sheets.

The replacement of a damaged engine mount with a new, identical part obtained from the aircraft manufacturer is considered to be an aifrrame minor repair.

major or minor repair, depending upon the complexity of the installation.
major repair.
minor repair.

Who has the authority to approve for return to service a propeller after a 100-hour inspection?

A mechanic with a powerplant rating.
Any certificated airman.
A non-certificated mechanic working under the supervision of a certificated mechanic with airframe and powerplant ratings.

1.
2.
1 and 3.

Instrument repairs may be performed

by the instrument manufacturer only.
by an FAA-approved instrument repair station.
on airframe instruments by mechanics with an airframe rating.

How is a quality system assured?

By an independent organization.
By a dependent organization.
By an internal reporting and auditing system.

According to Dr. James Reason, there are two types of human failure which can occur. They are:

active and latent.
mental and physical.
proper and improper.

Many areas of aviation have shifted their focus from eliminating error to

preventing and managing error.
identifying and mitigating error.
reducing and containing error.

When we think of aviation safety in a contemporary way, human error is

the starting point.
the ending point.
the intervention point.

All of the following are consequences of human error, except

mental stressor.
catastrophic.
personal inquiry.

The positive aspects of human factor issues are referred to as the

Magnificent Seven.
Dirty Dozen.
MEDA.

The SHEL model is another human factors tool. The goal is to determine not only what the problem is, but also

where and why it exists.
how we prevent the problem.
how many factors contribute to the error.

The three types of human error are

omission, commission, and extraneous.
active, latent, and stressor.
mental, situational, and physiological.

John and Nancy have been tasked with completing a hydraulic pump inspection. John is 5 feet 9 inches tall. Nancy is 5 feet 6 inches tall. What could result if Nancy is not tall enough to accomplish the task?

Personal reference.
Human error.
Complacency.

AP GN Aviation Mechanic Privileges and Limitations

AP GN Aviation Mechanic Privileges and Limitations

Jon K

Quiz Summary

Information

Results

Results

Categories

1. Question

2. Question

3. Question

4. Question

5. Question

6. Question

7. Question

8. Question

9. Question

10. Question

11. Question

12. Question

13. Question

14. Question

15. Question

16. Question

17. Question

18. Question

19. Question

20. Question

21. Question

22. Question

23. Question

24. Question

25. Question

26. Question

27. Question

28. Question

29. Question

30. Question

31. Question

32. Question

33. Question

34. Question

35. Question

36. Question

37. Question

38. Question

39. Question

Responses

Enjoying the Free Course?

Enjoying the Free Course?